Showing posts with label colour. Show all posts
Showing posts with label colour. Show all posts

Sunday, October 28, 2007

Lino Printing - Pop Art Giraffe

Its been a while since I've posted! Not done any lino prints since I last posted but I did come across a print on the Internet that I think is interesting. Its a pop art print of a giraffe, similar to my giraffe print except using 4 colours and more detail. Check it out here -

Pop Art Giraffe

That's all for now

Tuesday, May 15, 2007

Lino Printing - The Second Lino Print

I've just completed the second print using red paint. I realise now that I should have done some prints in different colours to experiment a little bit but I've decided to continue as planned with my 3 colour print - yellow, red and black.

As you can see from the two pictures below I put some paint down on the plastic sheet and then rolled it out until it was evenly spread.


Some people spread the paint out with a palette knife, but I find my approach works out OK. Although it takes a bit of rolling to get a nice even spread. The following picture shows my lino block after I have rolled it with paint. There are a couple of areas around the outside of the crest that picked up some paint. This is partly due to my efforts rolling but also these areas were not carved as deep as some of the others.


Once again I used a rolling pin to apply pressure to the page after I had placed it on the lino block. The following few pictures show the print as it was peeled away from the lino block.




I continued with the above process using all of the prints that I had created with the first lino cut. As I explained earlier I didn't experiment with different colours but I did experiment with different amounts of paint on the lino block. Producing prints with faint colours and producing prints with strong colours. Here is a pictures of the completed prints.


So one print left to do, that will be a black print. Basically giving an outline to the crest.

Sunday, April 29, 2007

Lino Printing - The First Lino Print

I've already spotted some mistakes that I've made or maybe not mistakes but at least things that I would do differently next time. I think I should have done some sort of design for the background instead of leaving it blank.
The first print will be in yellow. I got a sheet of glass to roll the paint on. Basically I put a bit of paint on the sheet of glass and rolled it until it was spread evenly on the glass and roller.

Once I had an even spread of paint on the roller I rolled it onto the lino block. I placed the block on some old newspaper as I figured things could get a bit messy. I rolled the paint onto the block and covered it evenly. In this picture you can see what the block looked like once it had been rolled.


A this point I gently placed a large sheet of white paper over the lino block. The first time I did this I didn't like up the edges of the paper with the edges of the lino block, this meant I wouldn't be able to do a second print on top of it as I'd have no way of knowing where to place the paper. I didn't have a baren (the tool used to press the paper) so I had to improvise. I decided to use a rolling pin. The following picture isn't very descriptive but you get the general idea. I rolled over the paper with the rolling pin. The rolling pin is quite large so it gave an even spread and covered all of the lino block.


I rolled over it a few times putting some weight on the roller. At this point I was ready to remove the paper from the lino block. I took a sequence of pictures as I peeled the paper back from the lino block.



Almost there...



Here's the print -

So I continued this process doing lots of prints. I think I finished up with about 12 prints.


I do not think the prints look very well on the white paper, maybe this is because of all the white space that I left. I'm considering printing the lino block again on some different colour paper. That's all for now!

Tuesday, April 17, 2007

Lino Cutting - First Post

Its been 10 years since I did lino printing at school. I've decided to give it a go now. I found a few websites that describe the process. I expected there would be more information and tutorials available on the Internet but this does not appear to be the case. Here are the best sites that I found:

Link Print - Tutorial
This tutorial gives a good introduction to lino printing using one colour.

Moongold Visuals - Lino Cutting
This site details the tools needed and the steps involved but in allot more detail.

After reading these two sites I decided I'd start a blog to record my attempts at lino printing.